IS Codes used for Doors, Windows And Shutters

Following are the IS codes which are used for standardization of Doors, Windows And Shutters. These IS Codes include standardization in the field of doors, windows, ventilators, gates and shutters made of any material.

IS 1003(Part 1):2003 Timber panelled and glazed shutters: Part 1 Door Shutters – Specification

IS 1003(Part 2):1994 Specification for timber panelled and glazed shutters: Part 2 Window and ventilator shutters

IS 1038:1983 Specification for steel doors, windows and ventilators

IS 1081:1960 Code of practice for fixing and glazing of metal (steel and aluminium) doors, windows and ventilators

IS 1361:1978 Specification for steel windows for industrial buildings

IS 1948:1961 Specification for aluminiium doors, windows and ventilators

IS 1949:1961 Specification for aluminium windows for industrial buildings

IS 2191(Part 1):1983 Specification for wooden flush door shutters (cellular and hollow core type): Part 1 Plywood face panels

IS 2191(Part 2):1983 Specification for wooden flush door shutters (cellular and hollow core type): Part 2 Particle board and hardboard face panels

IS 2202(Part 1):1999 Specification for wooden flush door shutters (solid core type): Part 1 Plywood face panels

IS 2202(Part 2):1983 Specification for wooden flush door shutters (solid core type): Part 2 Particle board and hardboard face panels

IS 4020(Part 1):1998 Door shutters – Methods of tests: Part 1 General

IS 4020(Part 2):1998 Part 2 Measurement of dimensions and squareness

IS 4020(Part 3):1998 Part 3 Measurement of general flatness

IS 4020(Part 4):1998 Part 4 Local planeness test

IS 4020(Part 5):1998 Part 5 Impact indentation test

IS 4020(Part 6):1998 Part 6 Flexure test

IS 4020(Part 7):1998 Part 7 Edge loading test

IS 4020(Part 8):1998 Part 8 Shock resistance test

IS 4020(Part 9):1998 Part 9 Buckling resistance test

IS 4020(Part 10):1998 Part 10 Slamming test

IS 4020(Part 11):1998 Part 11 Misuse test

IS 4020(Part 12):1998 Part 12 Varying humidity test

IS 4020(Part 13):1998 Part 13 End immersion test

IS 4020(Part 14):1998 Part 14 Knife test

IS 4020(Part 15):1998 Part 15 Glue adhesion test

IS 4020(Part 16):1998 Part 16 Screw withdrawal resistance test

IS 4021:1995 Timber door, window and ventilator frames – Specification

IS 4043:1969 Recommendations for symbolic designations of direction of closing and faces of doors, windows and shutters

IS 4351:2003 Steel door frames – Specification

IS 4913:1968 Code of practice for selection, installation and maintenance of timber doors and windows

IS 6198:1992 Specification for ledged, braced and battened timber door shutters

IS 6248:1979 Specification for metal rolling shutters and rolling grills

IS 10428:1983/ ISO 1804:1972 Glossary of terms relating to doors

IS 10451:1983 Specification for steel sliding shutters (top hung)

IS 10521:1983 Specification for collapsible gates

IS 14856:2000 Glass fibre reinforced plastic (GRP) panel type door shutters for internal use – Specification

IS 15380:2003 Moulded raised high density fibre (HDF) panel doors – Specification